Address: 601755 Vladimir Region., Kolchugino district, etc. Bavleny st. Factory, 11
Address: Russia, 624315, p Baranchinsky Sverdlovsk Region, st. Lenin, e-2a
Baranchinsky electromechanical factory founded in the period from 1734 to 1747 years, with the direct participation of the Urals and Akinfiy breeders Nikita Demidov, and as chief of mountain plants in the Urals Vasily Tatishchev. In 1921, the plant, the first in the Urals, Commercial production of electric cars. Since 1941, the company is leading developer of electrical machines up to 400 kW for general and special purposes. Between 1993 and 2000, the company carried out a major conversion products Currently, the plant produces vryamya asynchronous and synchronous machines.
Address: Russia, 600009 g.Vladimir ul.Elektrozavodskaya, 5
At present JSC "VEMP" is one of the leading Russian manufacturers and suppliers of asynchronous electric motors with a power range from 0.18 kW to 315 kW. On the main characteristics of the engine in line with international (IEC) and European (EN) standards. OJSC "VEMP" through its subsidiary "VEMP-Spectrum", together with well-known companies - Hitachi (Japan), KEB (Germany), Control Techniques (UK) manufactures, supplies and full-service complete variable frequency drive, which allows save up to 50%, and to make a complete replacement of DC drives to complete an asynchronous electric drive. JSC "Vladimir Electromotor Plant" and JSC "NIPTIEM" are part of the group RUSELPROM. Russian electrotechnical concern RUSELPROM - Let's start a powerful industrial complex, which consists of five production and research and development companies.
Address: 123557, Moscow, Presnensky Val, 27, p 6
Currently JSC "Krosno-Motor" produces specialized motors and DC generators ranging from 1 to 160 kW, voltage 110, 220, 440, 550, 750 RPM of 115 to 4000 min-1 shaft height of 160 to 315 mm, as well as three-phase synchronous generators for passenger rail cars 32 kW, voltage 140 - 110 V.
Address: 650099, Russia, Kemerovo, Kuznetsk Prospect 33
"NGOs" Kuzbasselectromotor "- enterprise" EDS Holding "- is Russia's largest producer of explosion-proof electrical equipment (motors, actuators, solenoid switches and contactors. "Kuzbasselectromotor" produces a broad line of AC motors series GRP, DKW and others. These electric motors are used in machinery and aggregates loaders, road headers, ventilation and other mining equipment operating in gas and dust exposure environment. For the needs of the production of explosive chemical, gas, petrochemical and other industries produced series asynchronous motors AIMR and AB. A major focus of the company is the development and introduction of new series of explosion-proof motors and starting equipment, working voltage 1140 V with a simultaneous increase of electric power from 100 kW to 315 kW.
Address: Russia, 115093 Moscow, Party Lane 1
OJSC "Power ZVI," specializes in repair and general industrial induction motors with squirrel-cage rotor and slip ring with shaft heights 280, 315, 355 mm and a capacity of 37 to 400 kW. Motor speed from 500 to 3000 r / min. The company manufactures both general industrial and special motor: attached to a compressor, for driving pumps, fans, blowers, cutters to drive, to drive the subway escalators, etc., as well as the balancer testing machines and running internal combustion engines.
Address: Russia, 141730, Lobnya, Moscow, ul. Krasnaya, 20
Closed Joint-Stock Company "Moselektromash" in the market of electric for over 50 years. The company specializes in the manufacture and sale of single-phase and three-phase asynchronous motors with low capacity. The plant manufactures single-and three-phase asynchronous motors in a wide range of four dimensions of the axis of rotation and over four million sample size.
Address: Russia, 180004, Pskov, October Avenue, etc. 27
Open Joint Stock Company "Pskov Electric Factory" specializes in the manufacture of electrical machinery DC and AC from a fraction of a watt to 45 kW for consumer electronic equipment, appliances, tools, automotive, railway and urban transport, shipbuilding and military equipment.
Address: Russia, 172386, Tver Region., Rzhev, ul.Kranostroiteley, 32
Along with the main products of "e Crane Plant" produces electric motors, power resistors, spare parts for tower cranes.
Address: 427961, Russia, Udmurt Republic, Sarapul, st. Elektrozavodskaya, 15
The main products of the plant are on-board power generation systems, control and protection of electric networks, on-board lighting for all types of domestic aircraft and helicopters.
And also products for industrial purposes:
Explosion-proof asynchronous electric motors of the AIML type
Electric motors for electric carts and electric forklifts
Generators for autonomous power supplies and wind turbines
Permanent magnet synchronous motors
Address: 634012, Russia, Tomsk, ul. Anna, 46/5
The main activities of our company are the production, maintenance, implementation, and maintenance of general industrial motors up to 630 kW. Supply motors Ex (miner, mine, for chem. Productions) marks: AB, BA, AIM, AIMR, GRP, HLW. Produce motors for specials. order (brake, multi, high-slip, with two shaft ends, etc.)
Address: Russia, 634012, Tomsk, Kirova, 58
OJSC "Sibelectromotor" - a powerful industrial complex full-cycle production of induction motors, cast iron and its products. The company, founded in 1941, is now in a stage of rapid development, its large-scale projects for the introduction of advanced production technology and equipment with the latest equipment, which allows the firm to take the leading position in the electrical industry.
Address: Russia, 634012, Tomsk, Kirova, 58, p / o 839
Development, production, sales of induction motors:
-General purpose series of AIR, AIRM. BP;
-Standards CENELEC series 6A, AIS;
-high-slip series AIRSM;
for the drying-series cameras ADPT, AIRPT, AISPT;
for nuclear power plants, the series of AIR, BP;
-with an electromagnetic brake series of AIR, AIRM, AIS;
and crane with an electromagnetic brake series AD2K (including tower crane);
Crane-slip-ring motors series MTN, 4 mt, 4MTM;
Crane-squirrel cage Seri MTKN, 4MTKN;
roller table-series workstations.
Address: 462270, Russia, Mednogorsk, Orenburg region. St. Motor, 1
OJSC "UralEleketro" as the manufacturer of induction motors, is considered as one of the leading Russian companies, which confirms came down the assembly line in October 2007 - 21 million motor. OJSC "UralEleketro" - Russia's only producer of low-voltage high security special equipment aged for 25 years, which is certified by the Maritime Register of Shipping and is widely used at the sites of the Ministry of Defense of the Russian Federation - starters series HMF-L contactors CST.
Address: Russia, 180004, Pskov, ul.Stahanovskaya, 89
since 1993. Our company designs and manufactures DC motors, mikroelektrodvigateli, tacho and gear motors including imported counterparts, take into account all the wishes of our customers.
Address: Russia, 303858, Orel., G.Livny, Mira, 40
The main activity of LLC "Electromash" is the development and production of a large range of electrical products.
We offer you:
Induction-type AIR general
Induction-type AIM designed for driving stationary machinery
We offer: low-voltage three-phase motors with squirrel-cage rotor with shaft heights 20, 280, 315, 355 mm capacity from 22 kW to 315 kW.
Address: Russia, 653000, Kemerovo region., Prokopyevsk, etc. Miners, 1
Ltd. "electrically" - factory direct current electric motors, generators, AC and DC, motor starters, contactors and DC motor drives, power converters, and frequency.
Address: 172391 Tver, Rzhev, st. Central, 21
Today the company "ELMA" - a plant for the production of crane motors 4th, 3rd and 2nd dimension. The company has a repair station, where a renovation of motors up to 100 kW.
Address: Russia, 150040 Yaroslavl, Prospect October 74,
One of the main manufacturers of electric motors in Russia. Currently producing motors now the new series, with heights of the axes of rotation (v. Fr. Cent.) From 71 to 355 mm., According to their energy and starting characteristics, noise, power consumption, material consumption, reliability, and durability, as well as design - not only meet, but surpass many foreign counterparts.